How
do I program System Time?
To program the System Time on Basic Partner
Release 4.1:
This System Programming procedure sets
the time that appears on system display
phones.
Enter the time in 24-hour notation. In
this scheme, the hours of the day are 0000
(12 midnight) to 2359 (11:59 p.m.). Since
each time must have four digits, use leading
zeros when necessary. For example, to set
the time to 9:00 a.m., enter 0900. For 4:45
p.m., enter 1645.
The time appears on system display phones
as a.m. or p.m. (not in 24-hour notation).
To change the System Time using a display
phone at extension 10 or 11:
Press Feature 00. Press System Program
(Left Intercom button). Press System Program
(Left Intercom button). Press # 103. Enter
the time in 24-hour notation. For example,
to set the time to 2:15p.m., press 1415.
A display similar to the following appears:
System Time Data 1415 Note: The time will
appear on system display phones as 2:15p.
Select another procedure or press Feature
00 to exit programming mode.
