| How
do I program System Time?
To
program the System Time on Basic Partner
Release 4.1:
This System Programming
procedure sets the time that appears on
system display phones.
Enter the time in 24-hour
notation. In this scheme, the hours of the
day are 0000 (12 midnight) to 2359 (11:59
p.m.). Since each time must have four digits,
use leading zeros when necessary. For example,
to set the time to 9:00 a.m., enter 0900.
For 4:45 p.m., enter 1645.
The time appears on system
display phones as a.m. or p.m. (not in 24-hour
notation).
To change the System Time
using a display phone at extension 10 or
11:
Press Feature 00. Press
System Program (Left Intercom button). Press
System Program (Left Intercom button). Press
# 103. Enter the time in 24-hour notation.
For example, to set the time to 2:15p.m.,
press 1415. A display similar to the following
appears:
System Time Data 1415 Note:
The time will appear on system display phones
as 2:15p.
Select another procedure
or press Feature 00 to exit programming
mode.
|
